Cleaning

Working with Interduct means you will have access to methods of work and programmes that will meet all your requirements.

Degreasing of all accessible branch ducts, main trunking, roof top ductwork and equipment therein, e.g. dampers, silencers, turning vanes, fire sensory and extinguishing equipment, fan and exit grilles etc. from behind the filters at canopies to the atmosphere.

Where the ducting is man sized our crews actually enter the system via appropriately sized access panels and remove all grease and debris from within. Where the ducting is not man sized the system is cleaned from a succession of strategically placed access doors and grease and debris removed. The ducting and equipment is scraped clean of grease build up back to bare metal; any liquid or dry consistency grease may be vacuumed away. Our service personnel ensure that this is done without comprimising the integrity of the system. Upon completion the system will be free from grease build up, although obviously there may be some staining of the internal surfaces. I t would be unrealistic to expect these surfaces to appear 'as new' In systems which have been neglected for some time. It is natural to encounter some carbonisation of the build up - especially if there has ever been a fire. Where possible and given adequate time this is chipped off to bare metal and washed through with special degreasing chemicals.

All areas worked on within the premises are protected and the kitchen areas left clean